Plastic Industry

Precision Color Compounds
Screen Tech Designs
Royal Technologies
AMCO Polymers
Tooling Docs
ChemTrend
ID additives
Routsis Training
Conair
Frigel
M Holland
5 Folds
ASACLEAN
RJG, Inc.
IQMS
Aurora Plastics
PolySource
Grainger
Stout
Mueller Prost
Mold Building Services

MAPP Plastics Discussion Forum

The MAPP Plastic Industry Discussion Forum allows members to rapidly communicate with each other. Post both questions and answers to questions that other MAPP members have about any industry topic from material and process issues to R&E Tax Credits and other business issues.

Username:  Password:  
Remember Me
Forgot Your Password?
Posted:  25 Nov 2015 00:09
64 Qt. Tote Tools for sale

We would like to sell these tools that someone could use for their proprietary totes to sell to big box stores.
We have not run any production off of these tools but do have some samples.  This is the information we have.
 
64 QT Tote Base
o   Cavitation  - 2
o   Gating – 4 drops per cavity, valve gate
o   Hot Runner – Yudo – 13 zone
o   Size- 70.87” x 45.28” x 36.99”
o   Locating Ring – 4”
o   Ejection – Standard machine ejection/knockout driven stripper plate or driven with external cylinders. Air poppets and center lift cylinder assist.
o   Estimated weight – 22,660 lbs
o   Age – 2011 construction
o   Shot count - Unknown
o   Tool drawings available – Yes, 2d
o   Part drawings available - Yes, 2d & 3d
o   Part Weight – 1,035 grams
o   Condition – Flash on parting line & Cavity 2 ejection issues. Needs parting line set back and refurbishment of air poppets/assist system to facilitate ejection. Budgetary estimate available ≈ $44.5K for repair/refurbishment

64 QT Tote Lid
o   Cavitation  - 2 – Stack Mold
o   Gating – 2 drops per cavity, valve gate
o   Hot Runner – Yudo – 10 zone
o   Size- 40.51” x 36.61” x 40.98”
o   Locating Ring – 4”
o   Ejection – pin
o   Estimated weight – 15,400 lbs
o   Age – 2011 construction
o   Shot count - Unknown
o   Tool drawings available – Yes, 2d
o   Part drawings available - Yes, 2d & 3d
o   Part Weight – 407 grams
o   Condition - Good

64QT Tote Latch
o   Cavitation  - 2 – Stack Mold
o   Gating – 1 drop per cavity, valve gate
o   Hot Runner – Yudo – 15 zone
o   Size- 21.654” x 17.716” x  21.968”
o   Locating Ring – 4”o
o   Ejection – pin
o   Estimated weight – 2,150 lbs
o   Age – 2011 construction
o   Shot count - Unknown
o   Tool drawings available – Yes, 2d
o   Part drawings available - Yes, 2d & 3d
o   Part Weight – 9.2 grams
o   Condition - Good
 
If you have interest or know anyone who does, please forward their questions Mike Ricklefs, 515-832-3125 or miker@vantecinc.com
© 2014 Manufacturers Association of Plastics Processors